Floor Heating is the Best Kind of Heating System

Water floor heating is the best kind of heating system known till date. It’s energy efficient, quiet and provides more comfort than any other kind of heating. You are not required to keep the system running in the hopes that the heat will finally reach to all parts of the house. The water floor heating in CA serves the heat from underneath the floor providing you toasty warm floors to walk on and a warmer room to stay in.

Since the heat is distributed evenly throughout the area, you only feel the comfortable warmth. In forced air heater, the hot air is blown in a room from one fixed point and it is always unbearably warm near the blower and is ridiculously cold in the far-fetched corners of that room.

Heat panel in CA can either electrical or hydric. If the tubes installed underneath the floor are using hot water as a way of heating the surface above, the system will be called hydric. The system has been there within us for centuries; Egypt used to control the temperature around an area by running cold or warm water underneath the floor. The Eskimo would start a fire a little far from the igloo and would channel the smoke from underneath the snow, through a tunnel. The concept of heating a facility be it a room or anything else from underneath the surface is quite old.

The innovation has made the whole system very efficient and even DIY friendly for the enthusiasts.
Following are the two types of radiant floors of modern times:

Electrical Floor Heating System:

The electricity isn’t the all in all, to provide the room with enough warmth. The floor heat panels come in two choices; pre-made pads and the onsite flooring. If you have ceramic or stone tile floor, the onsite radiant flooring will best work for you, but for every other type of floor, the pads can be used.

These heating pads are very comfortable to use; lay the pad after pulling the top layer out and make the electrical connection and voila, your radiant floor is all done.

If you don’t want to pull the first floor out, there are pads available each you can put under the sub-floor. All you are required to do is to access the sub-floor from the basement or any other crawl space to lay the system effectively.

The padding are designed in such a way that it throws all of the heat upward; the insulation panels are attached underneath every pad to make sure the warmth doesn’t travel through.

Hydronic Radiant Floor Heating:

Hydric radiant floors are basically done to take care of the whole house, not just one room or a specific area. Through a heavy-duty boiler, the water is boiled at 120 degrees Fahrenheit and is passed through the different pipes and tubes to warm the surface above. The tubing can be done through so many different options. The technicians may lie a web underneath the floor, a pre-made floor heat panel padding can be bought and the tubes can be pasted with the help of cement over a floor.

Leave a Comment

Scroll to Top