Do’s And Don’ts Of Network Cabling

With the internet as a huge source of information, DIY projects are becoming common. Especially, when you have to deal with the technology projects that include network cabling. Undoubtedly, network cabling can be a DIY project as it saves money. However, the process can be tricky, and you can get into trouble with a single wrong move. Finding a network cabling solution that works is a demanding process that involves many steps.

We have seen people calling professionals in the middle of the task when they cannot handle the work. That is why it is better to hire the experts in the beginning. Finding one of the best network cabling companies in Santa Monica CA is not as difficult as one might think. Again, the internet plays a big game, and no one cheats it. However, if you are still not convinced of hiring professionals, we can help you. Below are listed some do’s and don’ts of network cabling installation so that you can go through the process easily.

Do’s For Network Cabling Installation

Length matters – The maximum length defined by EIA/TIA is one hundred meters or 328 feet. Well, the length may vary based on the state laws or where you are using the cables.

Keep the cables dry and cool. Wet environment will affect the copper in the cables by disturbing signals. If you are installing cables between the buildings, be sure to have waterproof conduits and capped ends. Try to avoid large bundles as they disturb the signals.

Future planning matters – With the rapid change in technology, one should keep in mind that you never know when you need new cabling to meet the industrial needs. Therefore, it is better to install less expensive material that is easy for you to replace after a few month or years.

Get the dust caps as they block the dust from entering into the wires and making them worse. The trapped dust will affect the signals and is not easy to clean.

Don’ts of Network Cabling

One of the important things to keep in mind is to avoid long patches. The longer you cable is, the more problems you will face in handling them. Furthermore, with the long cables, performance of the system will be affected and the signals will be dropped. Therefore, there is no use of having long network cables as referred by professionals and affordable network cabling companies in Santa Monica CA.

Do not fix your network cables next to your electrical cables or other sources that have current as there are chances of interference. Fluorescent lights will produce high current and to avoid, it is better to have low power lighting or LED.
Do not overload cable trays. Being stuck at the bottom of a tray, they can be easily flattened by heavy cables affecting signal transmission. The cable tray suspended from ceiling or wall mounts can easily fall and ruin your installation and building structure.

Do not skip the testing part as it is one of the important steps towards your successful installation. Test your fiber optic cable with a power meter to find out how much light power you are losing in the terminated cable run.

Leave a Comment

Scroll to Top